If the parts are not secured the DLP Projector may not display properly. Note: Make sure you’ve secured the lamp and cover securely and properly. Step 3: Use gloves to install the new DLP Lamp so the oils on your hands don’t shorten the life of your DLP Lamp. Once the cover has been removed, take out the old DLP Lamp and dispose of it (properly). Step 2: Find the DLP Lamp cover and remove it. I also have a 50' plasma that I play games on, but nothing beats the wow factor of a 73' screen. Once you are certain that it has cooled, move on to Step 2. I upgraded my Sony rear projection with a 73' Mitsubishi DLP rear projection a couple of years ago, and I can say that I have not seen a better TV for gaming. Step 1: Do not unscrew a hot lamp! Turn off and unplug your DLP projector and allow the bulb to cool first. (Read the China Conundrum) It’s important that you purchase the correct lamp. You can find a replacement lamp part by purchasing from an authorized after-market retailer. If the lamp warning light is on then you will need to replace the DLP Lamp. It’s possible that all your DLP Projector needs is a new DLP Lamp. It may seem intimidating to actually fix your DLP projector, but fear not. If this doesn’t work try refreshing your computer’s monitor. Toggle through the menu inputs to assure you’re on the correct input signal. Step 5: Check your DLP Projector’s input settings. If you are using a laptop make sure that a dual display has been enabled. Step 4: Check the output settings on your computer. Use a soft cloth to clean it if you find that it needs a little dusting off. Also check to make certain the lens is clean and free of dirt or fingerprints. If it’s off, adjust your lens if it seems unfocussed or blurry. Step 3: Check to make sure that the lens cap on your DLP Projector has been removed. Is it possible that the batteries need to be replaced? This quick-fix could save you from spending a lot of time trouble-shooting other DLP issues. If anything is misaligned it could prevent your DLP Projector from working properly. Also check to be certain that all cords are securely connected. Step 1: Make certain that the DLP Projector is turned on and plugged into a power source. 8.6 2003-2004 3LCD stationary scribble/squiggly/random line pattern/road-mapping. We’ve described some common DLP Projector quick fixes below. 8.4 3LCD yellow (or orange or brown) haze or stain. If it’s been awhile since you’ve dusted off your DLP projector read on. Sometimes the issue with your DLP Projector can be fixed quickly and easily. Your DLP Projector and Common DLP Solutions You may find that your DLP projector wasn’t broken after all. Where do you begin? Should you just buy a new projector? What can you do to fix your DLP Projector? Don’t fret we’ll walk you through common DLP Projector issues, quick fixes, and when you should replace your DLP Lamp. Now that it’s all set-up it isn’t working properly. So your DLP Projector is a bit dusty, but you’ve decided that you’d like to brush it off and put it to work.
0 Comments
Leave a Reply. |
AuthorWrite something about yourself. No need to be fancy, just an overview. ArchivesCategories |